Tap tempo
Tap the button, or press the space bar or any key, in time with the beat.
- Taps
- 0
- Stability
- Start tapping
BPM and key from an audio file
Private by design. Your file is analysed in your browser and is never uploaded.
Key
Confidence: --
- Relative key: --
- Camelot: --
- Runner-up: -- (--)
Common tempos
Jump to the beat length, delay times and feel for a popular tempo.
- 60 BPMLarghetto
- 70 BPMAdagio
- 80 BPMAndante
- 90 BPMAndante
- 100 BPMAndante
- 110 BPMModerato
- 120 BPMAllegro
- 128 BPMAllegro
- 140 BPMAllegro
- 150 BPMAllegro
- 160 BPMVivace
- 170 BPMVivace
- 174 BPMVivace
- 180 BPMPresto
Every whole tempo from 40 to 240 BPM has its own page, for example 128 BPM or 87 BPM.
What is BPM?
BPM stands for beats per minute: how many steady pulses of the music fit into sixty seconds. A song at 60 BPM has one beat every second, and a song at 120 BPM has two. It is the number that sets how fast a piece feels, and it is what producers, DJs, drummers and dancers use to line things up.
Knowing the BPM lets you match tracks when mixing, set a metronome for practice, sync delay and reverb to the groove, or pick the right speed for a workout playlist. If you already know the tempo, you can start a metronome at that speed in one click.
How tap tempo works
Each tap records a timestamp. The gap between two taps is one beat, and 60,000 divided by that gap in milliseconds gives the BPM. A single gap is noisy, so this tool averages the most recent gaps, up to twelve of them. Any gap more than twice or less than half the median gap is treated as a slip and ignored, which stops a missed or doubled tap from throwing off the result.
If you stop tapping for two and a half seconds the counter resets and is ready for a new song. The last reading stays on screen so you can still read it.
How the audio analyser finds BPM
The file is decoded to audio, mixed down to mono and reduced to a lower sample rate. The tool then measures how much the sound spectrum changes from moment to moment, which produces a curve that jumps wherever a drum hit, pluck or chord change begins. It looks for repeating patterns in that curve across speeds from 60 to 200 BPM, gives a gentle preference to common tempos around 120 BPM, and reports the strongest result. It analyses at most ninety seconds, taken from the middle of long tracks, to stay fast.
How key detection works, and its limits
The analyser takes the spectrum of the audio and folds all the energy between roughly 60 Hz and 5 kHz onto the twelve notes of the scale, adding up how much of each note is present. That 12-value fingerprint is compared with the Krumhansl-Kessler major and minor profiles, which describe how strongly listeners hear each note in a typical major or minor key, in all 24 possible keys. The best match is the detected key. The result is also shown in Camelot notation, with its relative major or minor and the next most likely key.
Accuracy limits to keep in mind:
- A key and its relative major or minor share the same notes, so they are easy to confuse. Check the runner-up.
- Music that changes key, uses mostly percussion, or is not tonal in the Western sense can give an unreliable answer.
- Loud bass, distortion and sound effects can pull the result toward the wrong note.
- Tracks tuned away from standard pitch are partly compensated for, but not perfectly.
Tips for better results
- Tap on the main beat, the one you would naturally nod or tap your foot to, not on every subdivision.
- Give tap tempo at least eight taps and wait for the stability reading to settle.
- For the analyser, choose a section with a clear groove. Long ambient intros and breakdowns are harder.
- If the answer is half or double what you expected, click the matching alternative chip.
- Use the whole-number result for a metronome and the one-decimal result when syncing software to a track.
- Live performances and old recordings drift in tempo. Expect an average, not a single constant value.
Frequently asked questions
How do I find the BPM of a song?
Either tap along with the beat using the tap tempo button (or any key) and read the live BPM, or drop an audio file into the analyser. The analyser measures how strongly the track pulses at different speeds and reports the most likely tempo, plus half-time and double-time alternatives you can switch to.
How many times should I tap for an accurate BPM?
Eight to twelve taps are enough for most steady music. The tool averages your most recent taps and ignores any tap that is wildly early or late, so one slip will not ruin the reading. The stability indicator tells you how even your tapping has been.
Is my audio uploaded anywhere?
No. The file is decoded and analysed by your own browser using Web Audio and a small piece of JavaScript running in a background worker. Nothing is sent to a server, and nothing is stored once you close or reload the page.
How accurate is the key detection?
It is a good starting point, not a guarantee. Key detection compares the notes in the music against typical major and minor patterns, so it works best on tonal music with a clear harmonic centre. It can confuse a key with its relative major or minor, and it struggles with heavily percussive, atonal or modulating music. Treat the runner-up key as a real possibility and check by ear.
Why does the tool sometimes show half or double the tempo I expected?
Tempo is ambiguous: a track at 70 BPM can feel like 140 if you count the off-beats. The tool picks the most likely value and offers the half-time and double-time versions as one-click alternatives. Choose the one that matches how you would count the beat.
What is Camelot notation?
Camelot notation labels the 24 musical keys with a number from 1 to 12 and a letter, A for minor keys and B for major keys, so that keys that mix well together sit next to each other on the wheel. For example, A minor is 8A and its relative major, C major, is 8B. DJs use it to plan harmonic transitions.